Review of HJC FS-10 FS10 ANTHRACITE MOTORCYCLE Full-Face-Helmet

My previous helmet was a low buck, no frills HJC.When the inside (not removeable) started turning green, I figured it was time to splurge and get a helmet with not only a removable liner, but also some cool features.Since I wear sunglasses under an untinted screen, I though this integrated visor thing would be awesome.Now, like a dummy, I bought this helmet online (not from Amazon) without ever trying one on.I have three big complaints.One; my previous helmet was a XXL so I bought this in XXL but it's way too small.Two; the vent controls are exceptionally difficult to manipulate with gloves while riding.Three; the tinted visor, the whole reason I bought the helmet, doesn't drop down nearly far enough, not even close.Reflected light, or even direct sunlight if it's low on the horizon, gets directly into my eyes.If you try one of these on in a store and find you don't have the same problems I did, then ignore my review.But if you plan on ordering one without trying it on, be forewarned.

Click Here to see more reviews about: HJC FS-10 FS10 ANTHRACITE MOTORCYCLE Full-Face-Helmet

Product Description:
HJC FS-10 ANTHRACITE

HJC FS-10 FULL-FACE HELMET


The all-new FS-10 offers an innovative inner Sun Shield for extra protectionagainst glare, in addition to the many quality features riders have come to depend on from HJC.


Advanced Fiberglass Composite Weave Shell: Lightweight, superior fit andcomfort using advanced CAD technology
Accusight Anti-Fog Face Shield: Optically superior 95% UV protection, 3Ddesign
Rapidfire Shield Replacement System: Quick, tool-less shield removal andinstallation
One-Touch Integrated SunShield: Smoketinted SunShield deploys and retractsquickly and easily
HJ-09 2-Stage Shield Closure Mechanism: Compresses shield into the eye portgasket providing an extremely secure seal
Third Generation ACS Advanced Channeling Ventilation System: Full front toback airflow flushes heat and humidity out of the rear of helmet
SilverCool Interior: Moisture-wicking and odor-free interior with advancedsilver anti-bacterial fabric. Comfortable, removable and washable.
Built-in Communication System Speaker Pockets

TECHNICAL INFORMATION
Standards: DOT-218
Construction: Advanced Fiberglass Composite Weave
Weight: 3.55 lbs/1610 grams (approx, based on size medium solid color)



Size Chart

Buy Now

Review of HJC SY-MAX 2 SYMAX2 FLIP-UP LT. SILVER SIZE:LRG MOTORCYCLE Full-Face-Helmet

I've had an HJC Symax helmet for about a year and a half now, and have been very happy with it.It's protected me well in two falls - (1) I went down very hard on concrete at about 30 mph when a large dog came out of nowhere and ran into my back wheel (!) - my head and the helmet hit the road on the right front side; I'm sure the helmet's chin bar saved me from a broken jaw, and I didn't even have a headache afterwards.(2) I crashed going downhill on a steep dirt track (tires got caught in a rut), and landed face down; my face and the helmet landed on my chin, but no injury or soreness.The helmet is well-padded and well-ventilated, and the paint has retained its glossy shine.The flip-top option is extremely convenient, and necessary for me, as where I live (Thailand) there are a lot of vehicles that pollute badly, and I sometimes need to use a smog mask.I've had one problem - the plastic lever that opens the flip-top broke recently when I was opening the helmet.HJC customer service was excellent.First they sent me the replacement part for free.Then they answered my emails promptly and helpfully when I needed help figuring out how to get inside the chin section to replace the part.One other thing - I've noticed that at times the chin bar will click when closing it, but is not fully locked in place, and needs an extra tug (which causes a second click) to fully secure it.This is not happening now that I've replaced the chin bar, so my guess is that it was caused by a loose screw that attached the chin bar, causing one side to close and click slightly before the other side.I'd give this helmet 4 and a half stars (but there are no half-star rating increments available with Amazon).

Click Here to see more reviews about: HJC SY-MAX 2 SYMAX2 FLIP-UP LT. SILVER SIZE:LRG MOTORCYCLE Full-Face-Helmet

Product Description:
HJC SYMAX 2 LT. SILVER LRG

HJC SYMAX 2 Full-Face Modular Helmet


Lightweight Shell Design
Lightweight, fiberglass and Spectra composite weave shell with an ABS /polycarbonate alloy chin bar
Large eyeport opening for greater visibility
Dual-density lightweight EPS liner
Flip-up Chin and Face Shield
Single-button release allows chin bar/ face shield to be opened with one hand
Central locking mechanism can easily be operated with either hand
Flip-up chin bar makes communicating with your helmet on easier, and wearingglasses more comfortable
ACS Advanced Channeling Ventilation System
Multi stage intake vents combine with rear exit vents to provide flowthroughventilation
Chin bar intake vent provides airflow across the shield interior to helpeliminate shield fogging
Removable, Washable Interior
Removable, washable, Silvercool anti-bacterial, moisture wicking comfortliner
Nylon Strap-Retention Band
Neatly secures padded chin strap
SunShield Visor System
One-touch integrated smoke-tinted SunShield deploys and retracts quickly andeasily
HJ-S2 multi-stage shield closure mechanism compresses the shield into theeyeport gasket, providing an extremely secure seal



TECHNICAL INFORMATION
Standards: DOT-218
Construction: Fiberglass and Spectra shell with
ABS / Polycarbonate Alloy chin bar
Weight: 3.8 lbs / 1740 grams (approx,
based on Size Medium Solid Color)



Size Chart

Buy NowGet 18% OFF

Review of HJC CS-2N FLAT BLADE MC5F MOTORCYCLE Open-Face-Helmet

It's a very cool looking helmet in the pictures. It also fits really well if you fit well in HJC helmets like I do. However, they put so much padding or whatever to make it DOT/SNELL compliant that it's a massive helmet. It adds 3 inches to each side of your head giving you a cartoon-ish appearance. I honestly wouldn't recommend it. Part of the reason for a half helmet is appearance and the sheer size of it ruins the look.
At least visit a store to try it on first.

Click Here to see more reviews about: HJC CS-2N FLAT BLADE MC5F MOTORCYCLE Open-Face-Helmet

Product Description:
HJC CS-2N FLAT BLADE MC5F

HJC CS-2N HALF-HELMET


Lightweight injection-molded thermoplastic alloy shell
Dual forehead vent allows flow-through ventilation
Plush, brushed Nylex interior
Aerodynamic, low-profile visor
Removable (zip-off) neck curtain with Nylex lining
Nylon strap retention system neatly secures chin strap


TECHNICAL INFORMATION
Standards: DOT-218
Construction: Injection-molded thermoplastic
Weight: 2.3 lbs/1050 grams (approx, based on Size Medium Solid Color)



Size Chart

Buy Now

Review of HJC CS-R1 CSR1 WINE MOTORCYCLE Full-Face-Helmet

great helmet very comfortable with nice vents and great color. i would suggest trying the helmet on at a local motorcycle store to make sure you have the correct size then order online and save a bit.

Click Here to see more reviews about: HJC CS-R1 CSR1 WINE MOTORCYCLE Full-Face-Helmet

Product Description:
HJC CS-R1 WINE

HJC CS-R1 FULL-FACE HELMET

Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfortusing advanced CAD technology
RapidFire Shield Replacement System: Quick, secure, tool-less shield removaland installation
Optically Superior Face Shield: 95% UV protection
Advanced Ventilation System: Adjustable forehead and chin vents, and two rearexhaust vents
Plush, Nylex Interior: Removable and washable
Built-in Communication System Speaker Pockets

TECHNICAL INFORMATION
Standards: DOT 218
Construction: Advanced Polycarbonate Composite Shell
Weight: 3.48 lbs/1580 grams (approx, based on size medium solid color)



Size Chart

Buy Now

Review of SHOEI HORNET DS DUAL SPORT BLACK SIZE:XSM MOTORCYCLE Full-Face-Helmet

It's everything I looked for.Great fit, Very nice face shield, seals great, has high quality feel and several detents for partially open, etc.Visor is a touch shorter than a full off road MX style helmet, which is good at road speeds.Up to 60 mph or so...buffeting is not bad.Faster, I would say be careful.Any visor is gonna start to pull your head around as the wind picks up...but yes...visor is worth having, really blocks the low sun morning/eve.Fogging is very minimal except when I rode a few times at 35 degrees out, even then, only when stopped.

For Dual Sport riders, this is a great helmet. I hated to pay 400 bucks for it but did and am very glad.The cheekpads are removable and for 40 bucks, you can get thinner/thicker ones for a PERFECT feel.

What pushed me over the edge to buy was the feel, specifically...large ear pockets inside this helmet=NO crushed ears.I hate that!

The only real quality competitor to this model is the Arai XD, which is also a very nice helmet, fit, etc. BUT...visor is longer and I bet grabs more air=more wind buffeting on the street. For buzzing around town either would be good though. I did try both the Shoei and Arai on, then settled on the Shoei becuase of price and the shorter visor.A bonus I did not expect but got with this, is MUCH more peripheral vision than any of my street helmets in the past!

Lastly, Simpson makes a helmet of this type but the quality is not up to par.I wanted to buy American but nothing about it matched the Arai or Shoei.Too bad.I used to buy only Simpson.

Click Here to see more reviews about: SHOEI HORNET DS DUAL SPORT BLACK SIZE:XSM MOTORCYCLE Full-Face-Helmet

Product Description:
SHOEI HORNET DS BLACK XSM

SHOEI HORNET DS DUAL-SPORT HELMET


Full Face Safety Meets Off Road Style.
The Hornet DS is Shoeis first Dual Sport helmet, for riders seeking theflexibility of a full face road helmet that can hold its own in the dirt.Featuring a redesigned shield, AIM+ shell structure, wind tunnel-testedaerodynamics, cooling ventilation, wide visibility and a comfortable,lightweight fit. Shoeis Hornet DS offers a whole new swarm of possibilities fordual sport, dual purpose, adventure tour and supermoto riders.


The Shoei Hornet DS can be used in three configurations:
with visor and shield, with just shield, or with just visor.


A wide, 3-dimensionally curved shield completely seals against the eyeportbeading
Lightweight, Advanced Integrated Matrix Plus (AIM+) shell
Visor includes a front air intake to channel air into top of helmet
Shutter behind nose cover directs air flow to clear shield fogging
Fully removable 3-D interior, with 5-layer cheekpads that are channeled foreyeglasses
Breath guard and chin curtain included


TECHNICAL INFORMATION
Standards: DOT and Snell 2005 Approved
Construction: Advanced Integrated Matrix Plus (AIM+)



Size Chart

Buy NowGet 18% OFF

Review of KBC OFS WOMEN LAVENDER_WHITE MOTORCYCLE Open-Face-Helmet

The Good: Comfortable and snug fit. Compared to my old helmet this KBC has more padding. I love the easy snap release buckle. The color design on the helmet matches my scooter's colors.

The not so Good: Make sure to measure your head before ordering. My old helmet was a small size, so I ordered a small KBC helmet. Padding was much thicker making it too small. I sent that back and reordered a medium which fit just right.

Also, this helmet has a bit more wind noise compared to my old helmet. Though I think it vents more air into the helmet.

Click Here to see more reviews about: KBC OFS WOMEN LAVENDER_WHITE MOTORCYCLE Open-Face-Helmet

Product Description:
KBC Helmets OFS LADY LAVENDER/WHITE

KBC OFS Open-Face-Helmet

Type: Scooter/Cruising
Powercore shell- advanced formula of impact-resistant thermo resin material
Air-intake ventilation system
Equipped with anti-fog faceshield
Quick-release visor system
Removable, washable, and customizable DuraLux liner
Meets or exceeds DOT standards



Buy Now

Review of HJC CL-MAX CLMAX FLIP-UP SILVER MOTORCYCLE Full-Face-Helmet

Two weeks ago I crashed on the highway and did a face plant into the concrete at 75 MPH, then bounced across three lanes of traffic, all while wearing this helmet.Not a scratch on my face or head, and no head or neck injuries at all after slamming my head into the road at least 7 different times.

Not only did it protect me in my crash, but I had put in a few hundred hours of riding while wearing this helmet, and loved it.The easy access of the modular style is why I bought this helmet, but I also benefited from it's superior design.The helmet vents well while riding, is lightweight, and has very little drag (I ride a cruiser without a windshield) so the fatigue factor is minimal.

I would recommend this helmet to anybody who rides, and am buying another one myself to replace the one that just helped save my life.

Click Here to see more reviews about: HJC CL-MAX CLMAX FLIP-UP SILVER MOTORCYCLE Full-Face-Helmet

Product Description:
HJC CL-MAX SILVER
Lightweight Shell design. Injection-molded thermoplastic shell construction. Flip-up chin bar and face shield. Single button release allows chin bar/face shield to be opened with one hand. Flow-through ventilation system. Two adjustable upper forehead intake vents and two venturi exhaust vents. 3-position, adjustable chin-bar vent. Anti-Fog System. Removable/washable interior. Nylon strap-retention band. HJ-07 face shield. 100% protection from harmful UV rays. Exceeds VESC-8.

Size Chart

Buy Now

Review of HJC CL-33 CL33 CRUISER WINE MOTORCYCLE Open-Face-Helmet

The helmet arrived on time and in good condition.Was the right size and color.Took a ride with it immediately.Great service.

Click Here to see more reviews about: HJC CL-33 CL33 CRUISER WINE MOTORCYCLE Open-Face-Helmet

Product Description:
HJC CL-33 WINE
Features: Lightweight, injection-molded, thermoplastic alloy shell. Pop-up forehead and side vents allow for flow through ventilation. Plush, brushed-Nylex(R) interior for a comfortable fit. Flip-up shield features a tool-less removable/replacement system. Nylon strap retention band neatly secures chin strap. DOT 218 approved.

Size Chart

Buy Now

Review of ARAI XD'3 MOTARD BLACK MOTORCYCLE Off-Road-Helmet

I used this helmet to ride my KLR to Alaska and was very pleased with it. It is a bit fragile and adventure riding is tough on equipment. I broke the chin air vent and cracked one of the rear back vents. I would also recommend getting a fog shield of some sort if you are heading for cold weather. Visibility is fantastic and I found it to be fairly quiet (some knock it because it is loud) but you have a huge shield and that just isn't going to be as quiet as a helmet with a narrow eye slot. The shield doesn't pull your head nearly as much as I was lead to believe either. I sold mine when I got back with the bike but I will get another for my next ride.

Click Here to see more reviews about: ARAI XD'3 MOTARD BLACK MOTORCYCLE Off-Road-Helmet

Product Description:
Arai Helmets XD'3 MOTARD BLACK

ARAI XD3 Off-Road-Helmet


High-flow peak channels air directly into the front vents
Twin-cam Shield Pivot System allows the face shield to operate fully under apeak that can be lowered for better aerodynamics. Can be configured with shieldand peak, peak only(for use with goggles) or shield only*
Fully Removable/Replaceable and washable liner with optional sizes availablefor a custom fit
4 top vents. Dual Intake / Dual Exhaust Ventilationdual I/C top intake ventsand Double Delta bridged exhaust vents designed to draw significant volumes ofair from helmet interior
CLC (Complex Laminate Construction) shellfiberglass composite is stronger andlighterallows use of softer, less-dense liner materials inside for increasedrider comfort
Efficient chinbar vent (with interior and exterior controls) flows fresh airto the mouth area or across the shield interior to help prevent fogging
Large chinbar side exhaust vents draw out additional hot air
Meets or exceeds Snell and DOT standards
*The peak/visor supplied is not suitable for high-speed use where air striking aside or main surface of the peak may cause difficulty in returning the head to aforward and/or level position



Buy Now

Review of SHOEI MULTITEC FLIP-UP PEARL GRAY MET. SIZE:MED MOTORCYCLE Full-Face-Helmet

We've used both the 1980s BMW flip-ups and previous Shoei versions. This new one fits SOOOO much better than all the previous ones, and has such flexibility for the installation of communications units. Those of us who wear glasses really like this concept for a helmet. A recent fall down showed me it works for great protection.

Click Here to see more reviews about: SHOEI MULTITEC FLIP-UP PEARL GRAY MET. SIZE:MED MOTORCYCLE Full-Face-Helmet

Product Description:
SHOEI MULTITEC PEARL GREY MET. MED
SHOEI MULTITEC Modular Motorcycle Helmet

Sculpted Aerodynamic "Bag-Molded" Fiberglass Shell

Designed to minimize wind noise and drag

Advanced Integrated Matrix Plus(AIM+) shell

Flip-Up Chin Bar and Face Shield

Single-button release allows chin bar/face shield to be opened with onehand

Central locking mechanism can easily beoperated with either hand

Flip-up chin bar makes communicating with your helmet on easier and wearingglasses more comfortable

Adjustable Flow-Through Ventilation

Upper "Air-Scoop" ensures maximum air intake and excellent aerodynamics

Lower vent directs airflow upward across the inside of the face shieldreducing fogging and turbulance

3-D Interior Liner

Removable interior cheek pads and chin strap cover

Interior design reduces wind noise and provides a comfortable fit

Communication system compatible

Anti-Fog System

The lower air intake provides air flow that helps to diminish shield fogging

CX-1V Face Shield

Q.R.B.P. (Quick-Release Base Plate) allows tool-less shield removal andeliminates side covers for a flush, quiet fit

3-Dimensionally curved face shield for optical clarity

Scratch-resistant coating

Adjustable Base Plates ensure an "Air-Tight" fit

100% protection from harmful UV A&B Rays

One-piece injection-molded for consistent fit

Optional (CF-1V) racing shield with tear-off posts

Size Chart

Buy NowGet 18% OFF

Review of SPARX FC07 DRIFTER MOTORCYCLE Open-Face-Helmet

I bought this helmet two months ago and have enjoyed it on all my local rides.

Fit: I think it fits a little bigger than most other brands.I wear size L on most full-face helmets (Shoei, KBC, HJC, etc.)and open-face Vega helmet.Sparx FC-07's medium size fits me perfectly.

Ventilation: There is definitely plenty of air coming under the shield but it's not uncomfortable or unbearable. When the face shield is completely closed, I see a bit of fog only when I'm stopped at the traffic light but it'll disappear as soon as I start going.Since I don't intend to take my scooter out on the freeway, I cannot comment on the ventication.Frankly, I will only wear full-face helmets on freeways.

Price:Absolutely affordable.

Safety: I was looking for open-face helmet that meets at least 2 safety certification standards.There aren't many to choose from (weighing in the design/price factors too) that are both safe and nice to look at.The under-$100 helmets are mostly just DOT certified, which I don't feel safe wearing.This helmet is both DOT and ECE certified.I feel that it carries more credits on the safety measures.Usually, even if a helmet meets ECE standards, if it is not being sold in Europe, it cannot bear the ECE sticker.This one has the ECE sticker on it.

Style/Design: I was so happy to have found this helmet. It was very challenging to find a nicely designed light color helmet to match a bright-colored scooter.The white/orange/black tone is both elegant and lively.

I will definitely recommend this helmet for surface street riding.

Click Here to see more reviews about: SPARX FC07 DRIFTER MOTORCYCLE Open-Face-Helmet

Product Description:
SPARX FC07 DRIFTER

SPARX FC-07 Open-Face-Helmet

Lightweight Thermo composite shell construction
Form-fitted contoured cheek pads
In-visor anti-fog ventilation system
Quick release tool-less ratchet system
Crashed helmet program
5-Year limited warranty against manufacturers defect
Meets or exceeds DOT and ECE 22-05 standards



Buy Now

Review of SHOEI TZR TZ-R MATTE BLACK SIZE:MED MOTORCYCLE Full-Face-Helmet

I have had this helmet for awhile now and can offer an accurate opinion. My medium fits me perfect. It is snug but not too tight, although until broken in it is more snug than later. If you are touring and will be taking this helmet off all day, your ears may get rubbed somewhat raw.(the back of my ears do) This helmet is very quiet, although I almost always wear ear plugs. I installed a NOJ Quiet Rider fabric insert on the bottom of the helmet and it really makes a helmet much quieter. I had one on my last helmet also, took it off once while on a trip, put it back on before I went 10 miles. This helmet is also very light; in fact, it is one of the lightest helmets available. I have a white one because I think a white helmet or one with a primary color (red, blue, yellow etc.) is more easily seen by others, especially at night or under dim conditions. The ventilation is good, not great, but decent enough and I live in the Phoenix area. The faceshield is one of the best out there. It is easy to remove and install, is nice and thick with good clarity, and operates smoothly. Compare the faceshield to a different brand helmet and you will see what I mean. This helmet is also priced well, as I consider it a premium lid. Oh, it also looks nice and has a clean aero shape.

Click Here to see more reviews about: SHOEI TZR TZ-R MATTE BLACK SIZE:MED MOTORCYCLE Full-Face-Helmet

Product Description:
SHOEI TZ-R MATTE BLACK MED
SHOEI TZ-R Motorcycle Helmet


Whether youre cruising, touring, or sport riding, its hard to beat thecomfort and protection of the TZ-R. Using technology developed for Shoeisracing and performance models, the TZ-Rs aerodynamics reduce wind noise andincrease stability.


The newest member of Shoeis full-face family, the TZ-R, comes with a fullShoei pedigree. Extensive hours of wind tunnel and real-world testing refinedits shape and features. All elements are uniquely Shoei; Aim+ shellconstruction for strength, removable cheek pads for fit and comfort, and adistortion free CX-1V shield and Quick Release Base Plate System forunobstructed visibility.


Shoeis commitment to performance excellence, at a surprisingly affordableprice the TZ-R has it all.

• Quick Release Base Plate System
• Upper Air Intake
• Lower Air Intake
• Face Shield Defogging Vent
• Removable / Replaceable cheek pad and chinstrap covers.
• Preset Shield Opening Lever With Locking Mechanism
• CX-1V Shield
• AIM Shell Construction
• Snell M2005
• 5 Year Warranty From Purchase Date. 7 Year Warranty From HelmetManufacture Date.

Size Chart

Buy NowGet 18% OFF

Review of HJC CS-R1 CSR1 INFERNO MC5 SIZE:LRG MOTORCYCLE Full-Face-Helmet

Great helmet at a great price.It has good ventilation and a good fit.

Click Here to see more reviews about: HJC CS-R1 CSR1 INFERNO MC5 SIZE:LRG MOTORCYCLE Full-Face-Helmet

Product Description:
HJC CS-R1 INFERNO MC5 LRG

HJC CS-R1 FULL-FACE HELMET

Advanced Polycarbonate Composite Shell: Lightweight, superior fit and comfortusing advanced CAD technology
RapidFire Shield Replacement System: Quick, secure, tool-less shield removaland installation
Optically Superior Face Shield: 95% UV protection
Advanced Ventilation System: Adjustable forehead and chin vents, and two rearexhaust vents
Plush, Nylex Interior: Removable and washable
Built-in Communication System Speaker Pockets

TECHNICAL INFORMATION
Standards: DOT 218
Construction: Advanced Polycarbonate Composite Shell
Weight: 3.48 lbs/1580 grams (approx, based on size medium solid color)



Size Chart

Buy NowGet 18% OFF

Review of Ken-Tool 31564 Center Cap Remover Set

Own a 1997 Intrepid and didn't know we needed a special tool to remove the center cap on our hub cap till it fell off in the driveway.You use these special tools to remove the center hub so you gain access to the lug nuts on the wheel.I went searching and found these here at Amazon and it is just what you need if you have a center cap on your car wheel. With this tool you can remove the cap without doing damage to these very expensive center caps.

Click Here to see more reviews about: Ken-Tool 31564 Center Cap Remover Set

Product Description:
Remove most center dust caps with this set that consists of T65 (31565) Wide Blade for removing larger wheel covers and the T66 (31566) Narrow Blade for removing small delicate center covers without wheel damage.

Buy NowGet 15% OFF

Review of HJC IS-33 BLACK MOTORCYCLE Open-Face-Helmet

This helmet does it all, as far as I am concerned.It is comfortable and terrifically utilitarian.But the thing that makes this helmet superior to all the others is the sun visor system.There is a separate sun visor beneath the face shield that comes down by simply moving a lever on top of the helmet and, in contrast to other similar helmets of which I am aware, the sun visor instantly springs back into the helmet with the push of a button.I can't recount the number of times while riding when I suddenly faced into the sun.All that it took was a quick motion to deploy the sun visor and eliminate the sun glare.When I no longer needed it, I pressed the button on top of the helmet and POOF!, the visor was gone.
The price for the helmet is also great.I have never understood the need to spend hundreds of dollars for a helmet when the same degree of safety is available for much less.
I am one of those people who is never satisfied.I am always searching for something better.In this case, however, I am not looking for another helmet.This helmet works great for me!

Click Here to see more reviews about: HJC IS-33 BLACK MOTORCYCLE Open-Face-Helmet

Product Description:
HJC IS-33 BLACK

HJC IS-33 OPEN-FACE HELMET
Advanced Polycarbonate Composite Shell
- Lightweight, superior fit and comfort using advanced CAD technology
- Aerodynamic shell with large eyeport for greater visibility
- Impact absorbing, multi-density EPS liner
SunShield Visor System
- One-touch integrated smoke-tinted SunShield (Patent Pending #11/335,855)deploys and retracts quickly and easily
- Adjustable to three positions
ACS Advanced Channeling Ventilation System
- ACS Advanced Channeling Ventilation System provides flow-through ventilation
- Multi-stage intake vents and exhaust vents allow full front to back freshairflow that flushes heat and humidity out of the helmet
SilverCool Interior
- Moisture-wicking and odor-free interior with advanced SilverCoolantibacterial fabric
- Comfortable, removable and washable
HJ-17J Shield and QuickSlide Shield Replacement System
- QuickSlide shield replacement system allows for quick, secure and tool-lessshield removal and installation
- Optically correct face shield offers 95% UV protection
Nylon Strap Retention System
- Neatly secures chin strap
TECHNICAL INFORMATION
Standards: DOT-218
Construction: Injection-molded thermoplastic
Weight: 3.1 lbs / 1390 grams (approx, based on Size Medium Solid Color)



Size Chart

Buy Now

Review of Tire Minder Valve Stem Tire Pressure Guages - 32PSI

I've used these for a few years on all three of my vehicles.They were great for a while, but they can get difficult to see whether it is green, yellow, or red with brake dust and condensation inside.On one of my cars, I heard a noise when I was moving on the front driver's side, so I replaced the caliper and bearing, but the noise persisted.Thanks to my incredibly smart mechanic, he found that the noise was the tire because the pressure was low --- BUT the Tire Minder was green.

I just bought a plastic set with a different design at Advance Auto Parts, so the testing begins.

[Update 4/19/06] I bought that plastic set and the tire service place had to replace the valve stem because the plastic thing melted to the valve stem.Oh well, back to manually checking pressures.:(

Click Here to see more reviews about: Tire Minder Valve Stem Tire Pressure Guages - 32PSI

Product Description:
Proper Tire Pressure for: Better Gas Mileage, Increased Safety, Increased Tire Life Permanently replacers existing valve cap. All Green if tire has the correct range of PSI pressure Yellow ring appears if tire pressure drops into the caution zone. Red ring appears if pressure is very low and air needs to be added asap. Fill your tires to the proper pressure as recommended by the car's manufacturer. (not the tire's recommended pressure). These Tire Minders are for use on cars (or light trucks,etc). The revolutionary Tire Minder® Safety Pressure Indicator eliminates the guesswork of determining correct tire pressure. Proper inflation of your tires helps reduce the risk of poor handling, blowouts and accidents while improving gas mileage and tire life. These easy to install replacement valve caps constantly monitor your tire pressure with clear, bright color indicators. The Tire Minder® valve caps are precision made for a full range of cars, vans, motorcycles as well as light trucks and are accurate to within 1 psi. Utilize the Tire Minder® Safety Pressure Indicators and travel with confidence.

Buy Now

Review of StreetGlow ANTLRD L.E.D. Tire Lights - Red

Very cheap! Battery's were dead when I received them. Then after replacing the batteries they stopped working the day after.

Click Here to see more reviews about: StreetGlow ANTLRD L.E.D. Tire Lights - Red

Product Description:
This red L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of StreetGlow ANTPTLPR L.E.D. Exhaust Tip Design Tire Lights - Purple

Great price for what they really are.They are not built the best, but i would purchase more.The Purple stands out on my Aluminum wheels on my Yamaha Banshee.Cheers

Click Here to see more reviews about: StreetGlow ANTPTLPR L.E.D. Exhaust Tip Design Tire Lights - Purple

Product Description:
This purple L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of StreetGlow ANTLGR L.E.D. Tire Lights - Green

Anyone who rides a bicycle or motorcycle would benefit from this product.They replace the valve cap, so if you can put air in a tire you can install these!I bought these for my wife at her request, but I was sufficently impressed with the added visibility of the bike at night that I am buying some for myself.

Click Here to see more reviews about: StreetGlow ANTLGR L.E.D. Tire Lights - Green

Product Description:
This green L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of StreetGlow ANTPTLGR L.E.D. Exhaust Tip Design Tire Lights - Green

These lights are basically toys; don't expect any real durability here; the shell is plastic.That being said, when they have good batteries there are surprisingly bright!

Unfortunately mine came with a bunch of bad batteries -- what a waste!Once I put good batteries in, they worked well.

Keep in mind you need to manually turn these on and off; there are other kinds that will automatically turn on when you start biking.It's up to you which you would prefer.

Click Here to see more reviews about: StreetGlow ANTPTLGR L.E.D. Exhaust Tip Design Tire Lights - Green

Product Description:
This green L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of Tire Minder Valve Stem Tire Pressure Guages - 36psi

I brought a set of valve stem tire pressure guages hoping that I don't have to check the tire pressure again.

The pressure gauge is made three parts:
- A metal valve stem tire cap that thread to the valve stem.
- A clear see through plastic cap on top of the metal cap.
- A color stick (yellow, green, or red) inside the plastic cap that sticks out when tire pressure is low.

Out of the box, the color stick indicator is visible since there is no pressure exerts on it. When it it putting on the value stem on the tire, the stick will be invisible if the pressure is above the designed psi.

So you don't have to bend down and check the tire pressure again by just walking around the car and see if any of the gauge has color stick visible on it. If it is, you need to add more air to the tire.

You can buy the Valve Stem Tire Pressure Guages at 32, 36psi.

However, after just one day of use, out of four gauges, one has its plastic cap and yellow stick falling off and the other has its yellow stick comming out even thought the pressure is correct. So DOA at 50%.That is totally unacceptable for a simple device like this.

Click Here to see more reviews about: Tire Minder Valve Stem Tire Pressure Guages - 36psi

Product Description:
Proper Tire Pressure for: Better Gas Mileage, Increased Safety, Increased Tire Life Permanently replacers existing valve cap. All Green if tire has the correct range of PSI pressure Yellow ring appears if tire pressure drops into the caution zone. Red ring appears if pressure is very low and air needs to be added asap. Fill your tires to the proper pressure as recommended by the car's manufacturer. (not the tire's recommended pressure). These Tire Minders are for use on cars (or light trucks,etc). The revolutionary Tire Minder® Safety Pressure Indicator eliminates the guesswork of determining correct tire pressure. Proper inflation of your tires helps reduce the risk of poor handling, blowouts and accidents while improving gas mileage and tire life. These easy to install replacement valve caps constantly monitor your tire pressure with clear, bright color indicators. The Tire Minder® valve caps are precision made for a full range of cars, vans, motorcycles as well as light trucks and are accurate to within 1 psi. Utilize the Tire Minder® Safety Pressure Indicators and travel with confidence.

Buy Now

Review of LED TIRE LIGHT (EXHAUST TIP) - RED

Oh, my!A lot of haters out there!What's wrong with the Star Trek shuttle and the Batmobile?Where's your sense of fun?A more helpful review might have discussed the cost, ease of use, or the quality of materials.That's what I was looking for when I read the reviews.Just because YOU think it's immature or tacky-looking doesn't mean it IS.I'm a 51 year-old artist and teacher who drives a conservative-looking SUV but enjoy seeing tricked-out cars and other examples of human creative-differences.Hey, it's a tough world out there!Buyers, I say, if you like the look, go for it and the heck with stick-in-the-muds!I'll be looking, and so will others who appreciate diversity in our culture.Reviewers, next time, get the stick out of your ****.

P.S.Many of us would be better off if we gave more respect and thought to the opinions of 11-year olds.

Click Here to see more reviews about: LED TIRE LIGHT (EXHAUST TIP) - RED

Product Description:
Add flare to any wheel with OPTX Exhaust Tip Tire Lights. New simple twist on/off design to tire value stems. Battery operated (batteries included) Sold in pairs

Buy Now

Review of StreetGlow ANTPTLWH L.E.D. Exhaust Tip Design Tire Lights - White

DO NOT, PURCHASE THIS ITEM!! I purchased 4 packages of this item to be used upon all of my bicycles. Items received in a timely manner.

Appears ALL of these items are old or have been stored improperly. Total number of batteries received: 12 per package. Total number of live batteries: 0 Total number of dead batteries: 48 Note: EVERY battery had leaked acid. Batteries preinstalled in each unit, leaked causing considerable internal damage. Replacement batteries were all dead with some, having leaked.

Removed innerworkings of 1 item, cleaned and installed new batteries and found it to work just fine. Bottom line here? Don't waste your money on this item!



Click Here to see more reviews about: StreetGlow ANTPTLWH L.E.D. Exhaust Tip Design Tire Lights - White

Product Description:
This white L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of StreetGlow ANTPTLRD L.E.D. Exhaust Tip Design Tire Lights - Red

If you live in California make sure you read this first.
http://www.chp.ca.gov/html/streetlegal.html



Click Here to see more reviews about: StreetGlow ANTPTLRD L.E.D. Exhaust Tip Design Tire Lights - Red

Product Description:
This red L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of 124 Series Honda Accord 15" Replica Hub Caps

Two of the four hubcaps cracked on installation!These are plastic.They come with a cheap metal ring that is theoretically designed to strengthen the clips, BUT there are no metal clips!Just plastic.I didn't have a rubber mallet so I used my hands/fist.I'm a small woman, so I know I didn't exert an unusual amount of force to cause the breakage.I'll keep them because they look better than nothing.

Click Here to see more reviews about: 124 Series Honda Accord 15" Replica Hub Caps

Product Description:
This great looking set of 15" wheel covers will enhance the look of most vehicles. It is a replica of the original '98-02 Honda Accord wheel cover but it can be used on most makes and models. Metal clips ensure a perfect fit on most cars. Unlike the factory Honda hub caps this design does not require the lug nuts to hold them on.

Buy NowGet 49% OFF

Review of Tire Pressure Sensor

Ordered these to add to my R5000 system in my coach. They work great and are less expensive than going to the coach Mfg.!Fast delivery, no problems.

Click Here to see more reviews about: Tire Pressure Sensor

Product Description:
The Lectronix Tire Pressure Sensor is used with Lectronix infotainment products typically used in RV applications. Easy setup, follow the on-screen directions!

Buy Now

Review of StreetGlow ANTPTLNB L.E.D. Exhaust Tip Design Tire Lights - Neo Blue

the lights are not motion started but you have to manually turn tem on and off which is a nuisance.the yellow ones are not real bright either but the blue stand out better.

Click Here to see more reviews about: StreetGlow ANTPTLNB L.E.D. Exhaust Tip Design Tire Lights - Neo Blue

Product Description:
This blue L.E.D. tire light is ideal for adding color to your wheels.It's battery operated with batteries included and has an easy on/off twist design.

Buy Now

Review of Camco 44933 RV Dual Wheel Valve Stem Extender for Inner Dual Tire

I purchase these to gain better access to the inner tire on my dual wheel truck.Works ok but the trim rings did not like the placement of the stems so it ends up kind of twisted and the clips that hold these in place have slipped loose once already.

Click Here to see more reviews about: Camco 44933 RV Dual Wheel Valve Stem Extender for Inner Dual Tire

Product Description:
Camco RV Dual Wheel Valve Stem Extender for Inner Dual Tire is designed to bring all the tire valves to the outside rim and to make it easier to fill tires as well as check air levels. It is easier to use and is highly durable.

Buy NowGet 8% OFF